background image

4  

|  USING THE STAND MIXER

STAND MIXER SAFETY

10.  Do not let the cord contact hot surfaces, including the stove.

11.  Remove the flat beater, wire whip, or spiral dough hook from  

the Stand Mixer before washing. 

SAVE THESE INSTRUCTIONS

THIS PRODUCT IS DESIGNED FOR HOUSEHOLD USE ONLY.

ELECTRICAL REQUIREMENTS

Voltage: 120 V
Frequency: 60 Hz
Wattage: 250 Watts

NOTE:

 The power rating for your  

Stand Mixer is printed on the serial  

plate.
Do not use an extension cord. If the  

power supply cord is too short, have  

a qualified electrician or serviceman  

install an outlet near the appliance.
The maximum rating is based on the 

attachment that draws the greatest  

load (power). Other recommended 

attachments may draw significantly  

less power.

USING THE STAND MIXER

CHOOSING THE RIGHT ACCESSORY

ACCESSORY

USE TO MIX

DESCRIPTION

FLAT BEATER 

FLEX EDGE BEATER*

Normal  

to heavy 

mixtures

Cakes, Creamed frostings, Candies, 

Cookies, Biscuits, Pie pastry, Meat loaf, 

Mashed potatoes

WIRE WHIP

Mixtures 

that need air 

incorporated

Eggs, Egg whites, Heavy cream,  

Boiled frostings, Sponge cakes, 

Mayonnaise, some Candies

DOUGH HOOK

Mixing and 

kneading yeast 

doughs

Breads, Rolls, Pizza dough, Buns

*Accessory sold separately

W10747071B_EN_v01.indd   4

2/29/16   2:15 PM

Summary of Contents for 5KSM3311XEAC















Reviews: