7
Use of a chuck and cylinder that cannot be used together safely may
cause the cylinder to break at high pressure resulting in the chuck and
work flying out.
・
Check that the chuck and the cylinder are in the
“
safe combination
”
when using at high
pressure with our company or the distributor. Especially when the cylinder of our
company and a high pressure chuck of other company are combined, confirmation is
necessary.
・
If one of the abnormal events shown below occurs during operation, immediately stop
the machine and consult with our company or the distributor.
・
The work slips.
・
Loss of accuracy.
・
The work begins to chatter.
・
The machine's vibration significantly increases.
・
The griping force does not rise even if hydraulic pressure is raised.
In the case of processing a significant unbalanced work, lower the
rotation speed.
・
Unbalanced work generates dangerous centrifugal forces and the work could fly out.
That grip a work in the center of the stroke.
・
When gripping near the stroke end, the work may not be gripped sometimes according
to the deviation, etc., of the gripping part allowance of the work, and this is dangerous
as the work will fly out.
For All Users
For All Users
For All Users
