20
６．
Usage
In the case of attaching the locator and the jig on the chuck surface, use the taps
specified in Fig. 5.
If you are installing a jig to tap hole of the chuck surface, please install a 58N · m
tightening torque of the socket head cap screw.
Fig.5
●
The chuck can not be modified. This will not only break the chuck but the
chuck and work may fly out, which is dangerous.
●
Attach the locator or the jig with bolts which have sufficient strength due to
centrifugal force. The locator or the jig may fly out, and this is dangerous.
