KisanKraft
®
Agricultural Inter-Cultivator
KK-IC-210P
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp. KisanKraft
Limited
: +91.80. 6835 7800
Page 28 of 64
6. After the spark plug seats, tighten with a spark plug wrench to compress the
sealing washer.
If reinstalling the used spark plug, tighten 1/8-1/4 turn after the spark
plug seats.
If installing a new spark plug, tighten 1 / 2 turn after the spark plug seats.
A loose spark plug can overhand and damage the engine.
Overtightening the spark plug can damage the threads in the cylinder head.
7. Attach the spark plug cap.
Clutch cable
Check the free distance as follow. If the distance is not correct, loose the lock nut and ad-
just the bolt. Next tighten the lock nut and check for a proper clutch lever operation
(1)
Lock nut
(2)
Adjust bolt
Free distance 3-8 mm
STORAGE
Never store the machine with petrol in the fuel tank in a confined area with bad
ventilation. Petrol fumes could reach open flames, sparks, and cigarettes etc.
If the machine is to be stored for a longer period than 30 days, the following
methods are recommended.
1.
Empty the fuel tank.
2.
Start the engine and let it run until it stops due to lack of fuel.
3.
Change the engine oil if it has not been done for 3 months.
4.
Remove the spark plug and empty a little engine oil (about 30 ml) in the
hole. Crank the engine a couple of times. Screw back the spark plug.
5.
Clean the whole machine thoroughly.
NOTICE
