KisanKraft
®
Agricultural Inter-Cultivator
KK-IC-210P
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp. KisanKraft
Limited
: +91.80. 6835 7800
Page 27 of 64
CLEANING
1.
Remove the air cleaner cover and foam element, as described in the
IN-
SPECTION
procedure.
2. Remove the paper element from the air cleaner base.
3. Paper air filter element: Tap the filter element several times on a hard surface
to remove dirt.
4. Foam air filter element: Clean in warm soapy water, rinse, and dry thor-
oughly. Dip the filter element in clean engine oil, then squeeze out all excess
oil.
5. Excess oil will restrict air flow through the foam element and may transfer to
the
6. Wipe dirt from the inside of the air cleaner base and cover, using a moist rag.
Be careful to prevent dirt from entering the air duct that leads to the carbure-
tor.
7. Reinstall the air cleaner elements, and make sure both elements are
properly positioned. Install the air cleaner cover and tighten the wing bolts
securely.
SPARK PLUG SERVICE
Recommended spark plug: F6RTC
1. Disconnect the spark plug cap and remove any dirt from around the spark
plug area.
2. Remove the spark plug with a spark plug wrench.
3. Inspect the spark plug. Replace it if the electrodes are worn, or if the insulator
is cracked or chipped.
4. Measure the spark plug electrode gap with a suitable gauge. The gap should
be 0.028~0.031 in (0.70~0.80mm). Correct the gap, if necessary, by carefully
bending the side electrode
5. Install the spark plug carefully, by hand, to avoid cross-threading.
