KisanKraft
®
Agricultural Inter-Cultivator
KK-IC-210P
This warranty is null & void, if you fail to register the warranty with KisanKraft
by sending the KisanKraft Copy with dealer’s stamp. KisanKraft Limited
: +91.80. 6835 7800
Page 41 of 64
4.
Make sure that the person who operates the engine receives proper instruction.
5.
Keep the flammable substances (gasoline, matches) away from the operating engine.
6.
As gasoline is extremely flammable and explosive under certain conditions, please
refuel in a well-ventilated area with the engine stopped.
7.
Do not fill above the shoulder of the fuel strainer.
8.
Make sure the fuel cover is tightened.
9.
Make sure that any spilled fuel has been wiped off before starting the engine.
10.
Do not smoke or allow flames or sparks where the engine is refueled or where gasoline
is stored.
11.
Exhaust contains poisonous carbon monoxide, a colorless and odorless gas. Breath-
ing exhaust can cause loss of consciousness and may lead to death. Do not operate
the engine without good ventilation or in enclosed room.
12.
If you run the engine in an area that is confined, or even partially enclosed, the air you
breathe could contain a dangerous amount of exhaust gas. Provide adequate ventila-
tion to keep exhaust gas from accumulation.
13.
Place the engine on flat (level) surface, tilting angle of the engine should not be more
than 20º, otherwise it will lead to fuel spilling out.
14.
Do not cover the engine to avoid fire occurrence.
15.
The muffler becomes very hot during and immediately after operation. Be careful not
to touch the muffler while it is hot. Let the engine cool down before storing the engine
indoor.
PRE-OPERATION CHECKS
Check the oil level
Lubricating oil:
•
Engine lubricant oil is a major factor affecting engine performance and service life.
•
The use of the lubricating oil free of cleaning agent or the lubricating oil for the two-
stroke engine will shorten the life of the gasoline engine.
•
The operating temperature range recommended for the gasoline engine is -
5
℃
~40
℃
.
•
Use 4-stroke motor lubricant oil. 20W-40 is recommended in general, at all tempera-
ture use. Other viscosities shown in the chart may be used when the average tem-
perature in your area is within the indicated range.
Ambient temperature
•
Before checking engine lubricant oil, place the engine on level surface
