BRUSH CUTTER
KK-BC2-JP30/JP45 , KK-TC2-JP45
: www.kisankraft.com
: +91.80. 22178200
Page 11 of 68
NOTE
:
7. Thoroughly inspect the area where the unit
is to be used and remove all stones, sticks,
wire and other objects that could cause
injury if thrown at high speeds.
8. Never operate the unit without proper guards, shields or other safety protective
devices in place and properly connected. Inspect to determine that these safety
devices are installed properly, are in good condition and operate properly. If the
condition or operation of the devices are abnormal, they must be repaired or
replaced before using the unit.
9. Make sure the cutting head stops turning when the throttle trigger is released and
the engine runs at idle speed.
10. DO NOT use any accessory or attachment other than those supplied by the
manufacturer for use with this particular unit.
11. Use only for jobs mentioned in this manual.
12. Inspect the entire unit before using each time for worn, loose, or damaged parts.
DO NOT use until the unit is in proper working order.
13. DO NOT attach any blade to a unit without proper installation of all required parts.
Cautions during Operation:
1. If necessary to cut where people or cars could be hit
by thrown objects, cut at reduced (slow) throttle speed
to reduce the speed of the cutting head.
CAUTION: To avoid serious injury
2. Shut down immediately if the unit starts to shake or
vibrate. This could be a sign of danger from a broken
part or missing fasteners.
3. Disconnect spark plug wire before you work on the
unit or leave it unattended.
Summary of Contents for KK-BC2-JP30
Page 68: ......
