2-Stroke Petrol Engine
: www.kisankraft.com
: +91.80. 22178200
Page 63 of 68
INSPECTION AND SERVICE AT EVERY 50-HOUR
Cleaning and adjustment of ignition plug
After removing carbon accumulated on the
electrodes and the insulator, adjust the clearance
between the electrodes at 0.6 ~ 0.7 mm
When mounting the plug cap, push
it in securely
Cleaning of fuel filter
Using a piece of wire, or the likes, pull out the fuel
filter and wash with clean white kerosene. When it is
fouled heavily, replace the filter and also wash the
tank inside.
Use of fire is strictly prohibited
Carbon removal
Remove carbon from the muffler in-/outlet, cylinder and piston.
This work requires engine servicing skill and some tools. Consult the dealer or nearest
service center.
CAUTIONS DURING INSPECTION
Disconnect the ignition plug wires before inspection or adjustment to prevent
unexpected start of engine.
Do not touch the engine immediately after operation to prevent burn.
Use of fire is strictly prohibited when handling the fuel (gasoline).
Make sure to clean spilled fuel sufficiently before using the engine.
Do not wash the engine with water.
Do not change the setting revolution speed carelessly. (Consult your dealer
when changing the revolution speed.)
Summary of Contents for KK-BC2-JP30
Page 68: ......
