2-Stroke Petrol Engine
: www.kisankraft.com
: +91.80. 22178200
Page 61 of 68
ADJUSTING THE CARBURETOR
Engine revolution speed is adjusted at the optimum condition before shipping from
the factory. It should be adjusted only when it fails to operate properly. (Consult
your dealer when adjustment is necessary.)
1. Use the slow speed adjusting
screw to adjust the slow speed
revolutions.
Right turns: Increase the
revolution speed.
Left turns: Slow down the
revolution speed.
Increasing the slow revolution
excessively causes the driven
equipment unable to stop even if the
throttle lever is returned. The
revolution speed should not be
increased excessively.
2. In case with the slow speed fuel
adjusting screw Normal position is
where it is returned by one turn
from the fully closed position (right
turn).
Right turns: Increase the
thickness of fuel.
Left turns: Decrease the
thickness of fuel.
3. In case with the high speed fuel
adjustment screw
Right turns: Decrease the
thickness of fuel.
Left turns: Increase the
thickness of fuel.
Fuel adjustment for the carburetor is
completed at the optimum condition
before shipping from the factory.
When it is necessary to adjust,
consult your dealer.
Do not decrease the thickness of fuel
too much.
(It could result in the seizure trouble
of engine.)
Summary of Contents for KK-BC2-JP30
Page 68: ......
