KisanKraft
TM
POST HOLE DIGGER
EQ9800
: www.kisankraft.com
: +91.80. 22178200
Page 7of 20
2. Before starting the engine, turn the screw on the top of the fuel cap all the way
open (counterclockwise) to its venting position. To ensure that the fuel will not
spill during use, check that the fuel cap is screwed on tightly and the fuel cap
screw is in the venting position.
3. After using the power earth auger and before putting away or transporting it in a
vehicle, screw the fuel cap screw on (clockwise) tightly. This will prevent fuel from
leaking during storage. (The fuel cap will not leak fuel during storage if the fuel
cap is tight and the screw at the top is tight.)
NOTE: When storing unit in an upright position for pro-longed periods of time in
warm weather, vent fuel cap to prevent fuel from leaking from the carburetor.
STARTING AND STOPPING THE ENGINE
Preparation and Check Prior to Operation
CAUTION:
The gasoline engine is not filled with engine oil before it is delivered from the factory.
Please fill it with engine oil firstly
Check the lubricating oil level
1. Shut down the gasoline engine and place it at horizontal level.
2. Dismount the engine oil rule and check the oil level, which shall be up to the
oil filler.
3. If the oil level is low, fill the recommended lubricating oil to the oil filler
4. Remount the oil rule.
