KisanKraft
TM
POST HOLE DIGGER
EQ9800
: www.kisankraft.com
: +91.80. 22178200
Page 14of 20
5. Install the air filter cap based on the sequence of firstly mounting the buckle and
then screwing up the bolt of the air filter clockwise.
Maintenance of Spark Plug:
To ensure the normal operation of the gasoline, the clearance of the spark plug shall be
proper and free of deposit.
1. Dismount the spark cap in the spark plug window and put it aside.
2. Use the socket that is in proper size and special for the spark plug to dismount
the spark plug.
3. Visually inspect the spark plug, which shall be replaced in case of obvious
breakage and damage or crack or defects on the insulator. The excessive carbon
deposition shall be also removed.
4. Adopt the feeler gauge to measure the clearance
of the spark plug. If the adjustment is needed,
carry out the adjustment by bending the side
electrode.
5. Check whether the washer of the spark plug is in
good condition when placing in the spark plug;
manually screw it in for 2~3 turns, and then screw
it up with the socket special for the spark plug.
6. Reinstall the spark plug cap.
WARNING:
The spark plug must be screwed up, or it may become
extremely hot and damage the gasoline engine.
Adjustment of Valve Clearance:
Each set of gasoline engine is strictly debugged and inspected by our company. Generally,
the engine can get into the normal operation without any adjustment. After it is used for a
period of time, you may adjust the gasoline engine based on the following steps:
It is suggested to adopt the standard valve clearance: Inlet valve clearance: 0.05~0.08mm;
exhaust valve clearance: 0.08~0.10mm.
a) Hold the valve clearance adjusting bolt and loose the valve locknut.
