KisanKraft
TM
POST HOLE DIGGER
EQ9800
: www.kisankraft.com
: +91.80. 22178200
Page 3of 20
BEFORE GETTING STARTED
We wish to thank you for choosing our Post Hole Digger. This is
2-MEN
operated machine.
We are confident that the high quality of our machine will meet your requirement and
satisfaction and that your pit digger will give you long-lasting service. Before starting to use
your machine, make sure to read this manual carefully, which has been purposely drawn
up to provide you with all the necessary information for proper use, in compliance with basic
safety requirements
SAFETY INSTRUCTIONS
Accurate assembly, safe and effective use of the auger is the owner’s responsibility.
Read and follow all the safety instructions.
Operate and maintain the auger according to instructions and schedule included
in this operation manual.
Ensure that anyone who uses the auger is familiar with all the controls and safety
precautions.
Your manual contains special messages to bring attention to potential safety concerns,
machine damage as well as helpful operating and servicing information. Please read all the
information carefully to avoid injury and machine damage.
NOTE:
General information is given throughout the manual that may help the operator in
the operation or service of the machine.
CAUTION
It indicates you or your equipment can be hurt if the safety
instructions are not followed.
IMPORTANT
It indicates helpful information for proper assembly, operation, or
maintenance of your equipment.
WARNING
Engine exhaust from this product contains chemicals known to
cause cancer, birth defects, or other reproductive harm.
Do not carry the auger power head between the holes with the engine running.
The auger should not rotate when the engine is idling. If it does rotate, contact
dealer for instructions.
Always keep your hands, feet, hair and loose clothing away from any moving
parts of the engine and auger.
Do not allow children to operate this power auger. Do not allow adults to operate
the auger without proper instruction.
Do not operate any power equipment under the influence of alcohol or drugs.
Keep all screws, nuts and bolts tight.
The engine should be turned off and must be cooled, also spark plug wire must
be removed from spark plug before any repairs are attempted.
Temperature of muffler and nearby areas may be hot. Avoid these areas.