Kirsch FROSTER MED 95 eco PRO-ACTIVE, Operating Instructions Manual

Page: 61 / 76

Display Buzzer Description Measure
Unit key
required
3
Relay X:
n Defect in the relevant relay.
n The temperature of the chilled
goods can fluctuate.
n Transfer chilled goods to new
location.
n Contact the service depart-
ment.
-
3
Relay X:
n Defect in the relevant relay.
n The temperature of the chilled
goods can fluctuate.
n Transfer chilled goods to new
location.
n Contact the service depart-
ment.
-
3
Synchronisation error:
n Synchronisation error between
control unit and monitoring cir-
cuit.
n
No secured function of the
cooling controller.
n Set key switch to “0”.
n Unplug power plug and switch
on again Ä Chapter 7.1
“Switching on the unit”
on page 40 .
3
3
Connection problem:
n
Synchronisation error between
control unit and monitoring cir-
cuit.
n No secured function of the
cooling controller.
n Transfer chilled goods to new
location.
n Contact the service depart-
ment.
-
3
Control error:
n Error during self-test in the
cooling controller.
n The monitoring circuit takes
over temperature control.
n Contact the service depart-
ment.
–
3
Door-open alarm:
n Door is open for more than 60
seconds.
n Close door. –
3
Battery defective:
n Battery must be replaced.
n The temperature documenta-
tion and alarm in the event of
power failure fail.
n Switch off alarm.
n Inform the service department.
n Replace the battery
Ä
“Service contact”
on page 4 .
–
3
Power failure:
n Unit is not cooling.
n Alarm is active.
n The remote warning contact is
triggered.
n Check power supply. –
Status displays and error messages
Error messages
27.05.2021 Refrigerator/freezer MED series 61