NOTICE!
Danger of damage to the melt water container!
The units in the table below are equipped with a
melt water container on their underside, which can
be damaged by incorrect transport:
– Place unit on pallet and transport it.
– Do not lift unit with forklift or pallet truck unless it
is on a pallet.
MED 520 PRO-ACTIVE
MED 520 ULTIMATE
MED 520 CR PRO-ACTIVE
MED 520 CR ULTIMATE
MED 720 PRO-ACTIVE
MED 720 ULTIMATE
Protective equipment:
n
Safety shoes
n
Protective gloves
Decommission the unit as shown in section
sioning of the unit” on page 29
.
1.
Transport the unit to the new location.
Waiting time before recommissioning:
Once the unit has been transported, set up
the unit and wait one hour before recommis-
sioning, so that the refrigerant can distribute
itself evenly throughout the refrigerant circuit
again.
2.
Recommission the unit as shown in section
unit back into operation” on page 30
.
4.2 Final decommissioning of the unit
Insert unit key in key switch.
1.
Turn unit key to position “0”.
2.
Unplug power plug.
3.
Remove unit key.
4.
Leave unit door open to prevent the formation of odours and
mould.
Transporting the unit to a new loca-
tion
Final decommissioning of the unit
Transport and decommissioning
Final decommissioning of the unit
27.05.2021
Refrigerator/freezer MED series
29