IOM/GK(P)/CONICAL ISSUE DATE: 10.11.2015
Page 57 LAST REV. DATE: 01.08.2019
2.
IMPROPER INSTALLATION, OPERATION, MAINTENANCE, LUBRICATION,
REPAIR OF THIS KBL PRODUCT COULD RESULT IN INJURY OR DEATH.
If any tool, procedure, work method and operation technique is not
recommended by KIRLOSKAR BROTHERS LIMITED is used or followed, it
should be ensured that it is safe for personnel around and others. It should
also be ensured that the product will not be damaged or made unsafe by
the operation, lubrication and maintenance or repair procedures you
choose.
3.
SAFETY INSTRUCTIONS WHILE HANDLING AND STORAGE
When lifting the pump, use the lifting points specified on general arrangement
drawing, if provided. Use lifting equipment having a safe working load rating
suitable for the weight specified. Use suitable slings for lifting pump, which is
not provided, with lifting points. The use of forklift truck and chain crane sling
equipment is recommended but locally approved equipment of suitable rating
may be used. While lifting, the equipment adjusts the centre of gravity, so
that it is balanced properly.
Do not place fingers or hands, etc., into the suction or discharge pipe outlets
and do not touch the impeller, if rotated this may cause severe injury. To
prevent ingress of any objects, retain the protection covers or packaging in
place until removal is necessary for installation. If the packaging or suction
and discharge covers are removed for inspection purposes, replace afterwards
to protect the pump and maintain safety.
4.
SAFETY INSTRUCTIONS WHILE ASSEMBLY & INSTALLATION
Shaft alignment must be checked again after the final positioning of the pump
unit and connection to pipework as this may have disturbed the pump or
motor mounting positions. If hot liquids [above 80
°
C] are being pumped,
alignment should be checked and reset with the pump and motor at their
