Kirby Avalir, Owner'S Manual

Page: 37 / 68

35
OPTIONAL ACCESSORIES
Shampooing Carpets
1
Step on the upper pedal of the Toe-Touch Control until the
Multi-Surface Shampoo System is at its lowest position.
2
Turn the Suds Control Valve to the Carpet Setting. Turn the
unit on. As the unit is moved back and forth, foam will
release and the brush will work it into the carpet. For ease of
cleaning, shampoo smaller sections of the carpet at a time.
3
Turn the Suds Control Valve to the off position. Go back
over the shampooed carpet in multiple directions to
thoroughly work all of the shampoo into the carpet.
4
If necessary, empty the Waste Tray during shampooing.
Check the indicators on the edge of the Waste Tray Cover.
When liquid begins to fill the area below the indicators,
it is time to empty the Waste Tray.
Turn off the unit. Lift the Waste Tray and carry to a sink to
empty. Replace the Waste Tray before turning the system
back on and resuming shampooing.
5
Allow carpet to dry completely. Convert the unit to an
upright vacuum. Vacuum to remove the dry residue which
contains dirt and grime.