Kirby Avalir, Owner'S Manual

Page: 14 / 68

13 12
GETTING ST
ARTED
6
Press the bottom pedal on the Toe-Touch Control all the way
down to raise the front of the unit. Raise the Headlight
Hood.
7
Rest the two hooks on the back of the Power Nozzle on
the Attaching Bar on the front of the unit. Press the Power
Nozzle against the unit and secure with the Accessory Lock.
8
Flip out the handle on the Belt Lifter and use it to turn the
Belt Lifter clockwise until the green arrows line up. This will
engage the belt so the Brush Roll will spin. See page 17.
Lower the Headlight Hood.
9
Install a Disposable Filter Bag before vacuuming.
See page 13.
Power Switch
Press the Power Switch at the rear of the unit to turn it on or off.