VISION 1440B OWNER’S GUIDE
3
System Operation
ARMING
DISARMING
Press the UNLOCK button on the vehicle’s factory
keyless remote.
After you press Unlock, vehicle haz-
DUGOLJKWVZLOOÁDVKDQGWKHGRRUVZLOOXQORFN:KHQWKH
hazard lights stop, the siren will chirp 3 times and Status
LED will turn off. The system is now disarmed and you
may enter the vehicle.
LOCK
UNLOCK
TRUNK
(FACTORY REMOTE)
0USHå5.,/#+
"UTTON
LOCK-UNLOCK-LOCK:
This is an alternate Sensor Bypass Arming
method. It’s especially convenient on Push Start cars, where turning the
ignition ON/OFF multiple times is troublesome. After running the engine
for more than 10s, turn off the ignition and within 10 seconds exit the vehicle
and
Lock
via keyless remote; then within 5s,
Unlock
; then within 5s,
Lock
again
. The 1440 will then be Armed with the shock sensor Bypassed.
NORMAL ARMING
This method is the typical way to arm the 1440,
with the shock sensor enabled.
Ensure that all doors
are closed and then press the LOCK button on the vehi-
cle’s factory keyless remote. After you press Lock, vehicle
KD]DUGOLJKWVZLOOÁDVKDQGWKHGRRUVZLOOORFN:KHQWKH
hazard lights stop, the siren will chirp 1 time and Status
LED will light solid for 5 seconds. After 5 seconds, the
/('ZLOOVWDUWÁDVKLQJDQGDOODODUPWULJJHUVEHFRPHDF
-
tive. (No triggers are active during the initial 5 seconds.)
SENSOR BYPASS ARMING
This arming method allows you to disable the shock sensor
while keeping other alarm triggers active (e.g., door, trunk,
ignition).
Run the engine for more than 10 sec., then turn the
ignition ON & OFF 3 times within 10 sec. You now have 10 sec. to
exit the vehicle, close all doors, and press the LOCK button on the vehicle’s
NH\OHVVUHPRWH$IWHUSUHVVLQJ/D]DUGOLJKWVZLOOÁDVKWKHVLUHQ
ZLOOFKLUSWLPHVDQGWKH/('ZLOOLPPHGLDWHO\VWDUWWRÁDVK7KHV\VWHP
is now armed, and all triggers
except shock
are active.
LOCK
UNLOCK
TRUNK
(FACTORY REMOTE)
0USHå,/#+
"UTTON
