VISION 1440B OWNER’S GUIDE
9
PROGRAM FEATURES EXPL AINED
Confirmation Chirps
When set to
ON
(default), the siren will chirp 1 time when the system is
Armed and 3 times when the system is Disarmed.
When set to
OFF
, the siren won’t chirp 1/3 times when Armed/Disarmed.
Vehicle Lights ON During Remote Start
When set to
ON
, vehicle lights will illuminate when the Ignition is turned
on by a remote start system.
2QO\ZRUNVLIWKHRSWLRQDOOLJKWÁDVKUHOD\LV
installed, and only if
Remote Start Compatibility Mode
is also turned
ON
.)
IG Protect Mode / Remote Start Compatibility Mode
When set to
IG Protect Mode
, the system will trigger the siren when the
Ignition goes on, as described on page 5 of this manual.
When set to
Remote Start Compatibility Mode (RSCM)
, the system
will bypass the Shock Sensor and Ignition triggers, and IIP will become
active, as described on page 5 of this manual.
IIP Trigger Selection
When
Remote Start Compatibility Mode
is
ON
, you may select which “trig-
ger sectors” IIP uses to temporarily switch the system back into IG Protect
Mode while IG is off. You have two programming choices:
(1) ALL:
switch
to IG Protect Mode upon sensing a door open condition
and/or
a sensor
trigger; or
(2) DOOR:
switch to IG Protect Mode upon sensing only a door
open condition.
Siren Output
When set to
Continuous
(default), the system will feed a continuous (–)
Ground output to sound the included siren for 30 seconds (full trigger).
When set to
Pulsed
, the system will feed a pulsed (–) Ground output. This
can be used to create a unique siren sound on the included siren, or to con-
nect to the vehicle’s horn via an optional relay.
