6
VISION 1460 INSTALL GUIDE
SYSTEM WIRING DIAGRAM
3-wire
Harness
ALWAYS tape/cover all wires that
you do not use. Prevent shorts!
There are two GREEN wires.
DON’T CONFUSE THEM!
RED
Optional
Remote*
* Connector for the Antenna Unit of the optional TR537S 2-way Paging Remote or TR365 1-Way Remote.
When adding an optional remote, you must learn the remote to the 1460. Refer to the User Guide that comes
with the TR537S or TR365 for details.
1
Output used to control an optional starter kill relay (p/n: 896H-1B) and/or optional LED scanners (LUMINATOR).
2
Some cars require use of the optional DSS-6 wire splitter to easily connect to multiple locations.
3
This optional (+) input behaves exactly like the (–) WHT input. See Owner’s Guide page 9 for details.
4
Some cars require the use of an optional relay to invert the polarity of this wire to (+)12v.
5
Only used when using the optional TR537S paging system. Long press of TrunkOpen button triggers (-) output.
5A
Fuse
BRN
YEL
(–) GWA Output
1
(500mA)
BLK
(–) Ground Input
WHT
(–) Door/Trunk Input
2
RED
GRN/WHT
(+)12v Power Input
(+)12v Ignition Input
(+)12v Siren Output (2A)
WHT/RED
GRN
BLU/YEL
(+)12v Door UNLOCK input
GRN/YEL
(+)12v Door LOCK input
(+)12v Hazard Light Input
(+)12v Trunk Release Input
GRN
WHT/BLK
RED/WHT
(–) Pager CH. Output
5
(150mA)
(–) Park. Light Output
4
(150mA)
(+)12v Trigger Input
3
LED
Program
Switch
Program
Switch
LED
6-wire
MAIN
HARNESS
4-wire
Harness
Shock
Sensor
VISION
IR SHOCK SENSOR
