7
© 2015 KIRAMEK, INC.
main features
IGNITION TRIGGER
IG PROTECT MODE
(default)
The siren will blast for 30 seconds when the
Ignition (IG) is switched ON while the system
is Armed. Vehicle parking lights may flash.
See bottom half of page 4 on
how to Disarm in this case. Also see Table-1, pg.9.
REMOTE START COMPATIBILITY MODE (RSCM)
(user-programmable)
When the Ignition switches ON while Armed in this
mode, the siren will
not
trigger. Instead, Shock
Sensor and Ignition triggers are bypassed, while
Door, Hood & Trunk triggers remain active. This
allows 3rd party remote starters to start the en-
gine without triggering the siren. The vehicle is still protected though, and
any attempt to open a door or the trunk will trigger the siren. And when the
remote starter stops the engine (i.e., Ignition turns off), Sensor and Ignition
triggers are automatically re-activated.
(See page 11 to program.)
IIP
(Intelligent Ignition Protect)
IIP activates when you program
RSCM
. The function of IIP is to
temporarily switch back to
IG Protect Mode
after a siren trigger.
Purpose.
Most “remote start / turbo timer” compatible car alarms by-
pass
all trigger inputs
after
the Ignition is switched ON. So if a thief
opens a door the siren will trigger; but the thief can then close the door,
turn on the Ignition, wait until the siren stops, then drive away in si-
lence because the Ignition-ON state prevents the siren from triggering
again! And other car alarms that
always
trigger the siren when the Ig-
nition turns on offer no remote start or turbo timer compatibility at all.
IIP
solves this problem by offering compatibility with Remote Start
& Turbo Timers, with complete security.
How it works.
Normally, if the Ignition is turned ON while in
RSCM
,
the system automatically bypasses the Sensor & Ignition triggers but
keeps Door, Hood and Trunk triggers active. But if the 1460 is triggered
by a Door or Sensor
before
the Ignition is turned ON, IIP automatically
switches back to
IG Protect Mode
, and the siren will be triggered if the
Ignition is turned on. Disarming and Arming again will revert to RSCM.
PROGRAMMABLE
IG ON
IG ON
LO
CK
AC
C O
N
STA
RT
START
STOP
