11. DESCRIPTION OF ACCUMULATOR UNIT
1. Assemble the accumulator unit with bolt, nut, and washer.
2. Connect the electric starting cable to the starting electromagnet, by crossing
the former under the fuel tank.
3. Connect the grounding cable to the back end of the generator.
4. First connect the electric starting cable to the positive pole the accumulator,
then the negative pole, while disconnect the electric starting cable in reverst
(1) Switch of starting electromagnet valve (5) Accumulator
(2) Starting cable Note: Please use the accumulator
which value is above 12V-35AH
(3) Guard frame of the accumulator (6) Holding down holder
(4) Guard plate of the accumulator (7) Cable
12. DESCRIPTION OF CASTOR UNIT
1. Fix the four castors on the axles with washer and pin.
2. Fix the axles on the generator with bolt and nut.
(1) Inner side (8) Pin
(2) Short side (9) Castor
(3) Long side (10) Axle (engine side)
(4) Castor stopper pin (11) Axle (generator side)
(5) Stopper plate (12) Bolt
(6) Generator side (13) Nut
(7) Gasket
-
-
-
-
