7
LED
LED
condition
Module operation
condition
Power
ON
Power on.
OFF
Power off.
Connection
with a
controller
ON
Active connection of the
controller.
OFF
No
connection
with
controller.
Connection
with WiFi
ON
Connection
to
a
programmed
wireless
network is on.
OFF
No
connection
with
wireless network.
Connection
with a server
ON
Connection
with
www.econet24.com
external server is on.
OFF
No
connection
for
www.econet24.com
external server.
After the power is on, ecoNET300 requires
app. 1 minute in order to load the
operational system. Then, the module begins
to work and indicates its condition with LED
indicators.
In
a
connection
between
ecoNET300 module with a controller is
active, a “
connection with controller
”
indicator lights up. New functions for
managing ecoNET300 module are added to
the main menu.
MENU
→
Information
→
ecoNET WiFi
MENU
→
Information
→
ecoNET Ethernet
MENU
→
Main settings
→
WiFi
In case of connection with LAN wire network,
a
ecoNET Ethernet
tab will be available in
controller menu from which the
IP
number,
mask and gate can be read out and
ecoNET24 server connection condition can be
checked. It is required to save the displayed
IP
number (e.g. IP:10.1.2.237). This
number in a form of: http://10.1.2.237 is
entered into the address field from the level
of LAN network. A website to operate the
controller menu will be activated.
It is necessary to enter network parameters
in
General settings
menu of the control
panel in order to make a wireless connection
via Wi-Fi.
To do this, select:
MENU
→
general settings
→
WiFi (WiFi
settings)
Select
SSID
in
Network Settings
. It is a
name of the local wireless network which has
to be the same for all devices working in this
network (SSID can be, e.g.: myWiFi).
In case of connection with a chosen Access
Point via wireless network, user has to know
the settings of Wi-Fi network which the
module will be connected to: network name
(SSID), protection type, access password.
The ecoNET300 requires active DHCP server
of Access Point (e.g. router) because
manual IP assignment for ecoNET300
internet module is not supported. More
information can be obtained from router
configuration
software
or
network
administrator.
WPS/RESET button. Deleting user name
and password and restoring default
settings.
The LED indicators of module operation
condition.
