11
In the
Alarms
tab, user can read:
•
a list of registered alarms and other
events sent by the controller,
•
a type of alarm, event and period of its
occurrence is displayed.
Log into
www.econet24.com
external
server in order to display all logs of alarm
conditions from the beginning of operation of
the controller.
Alarm notices can be sent on e-mail. It
enables the user to react fast in order to
restore normal operation of the controller.
9.6
Schedule
In the
Schedule
tab user have the option of
setting the time intervals, according to the
list after clicking on the
symbol:
•
reduction preset temperature of the
heating circuits.
Turn on the schedule by selecting
On
for the
available circulation from the list, and enter
the decreasing temperature value in the
Decrease
field, .e.g.
10°C
. On a bar chart
daily graph (24 hours), click on the
appropriate bars (each bar corresponds to 30
minutes), which allows to set the active
temperature reduction in the selected time
interval. Once set, choose
Save
.
Decreasing of preset temperature can be set
separately for all days of the week.
In the example above, on Tuesday, the
preset temperature for the heating circuit is
reduced by 10°C between 6:00 and 7:30 and
15:30 to 19:00. In other ranges, the preset
temperature will not be lowered.
9.7
Fuel consumption
In the
Fuel consumption
tab user can read
the fuel consumption in kilograms in a daily
cycle (every 1 hour) or a monthly cycle
(every 1 day).
9.8
Device settings
The
Device settings
tab enables to:
•
change the controller installation address,
•
reading basic Wi-Fi network parameters,
•
readout a software version in the
controller module and additional modules
or panels,
•
update internal ecoNET300 software.
The ecoNET24 server periodically checks
availability of new software version for the
ecoNET300 module. It displays information
concerning a new software version. All the
user needs to do is to press
Update
button.
When changing Wi-Fi network, click
Refresh
,
select
Network name
, and used
Type of
security
(e.g. WPA2 Personal) and enter
Password
to a selected network.
All modifications must be confirmed by
Save
button.
10.
Mobile application
The mobile application allows remote access
via smartphone, tablet only to controllers
equipped with the ecoNET300 internet
module. The application uses an Internet
connection and a user account on the
www.econet24.com
website.
The application allows to preview and
efficiently configure the most important
parameters of the controller. In this regard,
it primarily provides:
• preview basic operating parameters
The applications works only with ecoNET24
server, so should be need to sign up for an
ecoNET account to use them.
Software update process can be shorter or
longer depending on the speed of Internet
connection. Do not disconnect the device
from a power supply during update process
because it will cause its damage.