Kioti DK65S, Manual

Page: 15 / 111

1-10 DK65S
3. Before installing or using P.T.O driven
equipment, read the maunfacturer’s
manual and review the safety labels
attached to the equipment.
4. W h e n o p e r a t i n g s t a t i o n a r y P . T . O
driven equipment, always apply the
tractor parking brake and place chocks
behind and in front of the rear wheels.
Stay clear of all rotating parts.
USING 3-POINT HITCH
1. Use the 3-point hitch only with equip-
ment designed for 3-point hitch usage.
2. When using a 3-point hitch mounted
implement, be sure to install the proper
counterbalance weight on the front of
the tractor.
3. When transporting on the road, set the
implement lowering control in the
“LOCK” position to hold the implement
in the raised position.
In order to service your tractor you must
park it on a flat level surface, set the park-
ing brake, place the gear shift lever in
neutral and stop the engine.
1. Allow the tractor time to cool off before
servicing any part that may have become
hot while the tractor was running.
2. You must always stop the engine be-
fore refueling the tractor. Avoid over-
filling the tractor or spilling the fuel.
3. Do not smoke while working around the
battery or when refueling your tractor.
Keep all sparks and flames away for the
battery and fuel tank. The battery pre-
sents an explosive hazard because it
gives off hydrogen and oxygen… espe-
cially when recharging.
SERVICING THE TRACTOR
C71O121A C71O122B C71O123A
(1) 3-point hitch lowering speed knob
(A) Lock ( ) Fast ( ) Slow