KINZO 25C5030, Instruction Manual

Page: 48 / 132

25C5030
48
ENGLISH
■ Remove the collet nut and the old collet (9).
■ Place the new collet.
■
Replace the collet nut.
■ Release the spindle lock button.
Always unplug the tool before replacing the collet.
Switching on and off (fig. A)
■
To switch the machine on, set the on/off switch (1) to ‘I’.
■ To switch the machine off, set the on/off switch (1) to ‘0’.
Adjusting the speed (fig. A)
This machine has been fitted with an adjusting wheel (2) for the
maximum speed.
■ Turn the adjusting wheel (2) as indicated on switch (1) to set the
maximum speed.
■ Choose a low speed for working wood and plastics.
■
Also choose a low speed for polishing.
Polishing (fig. A & B)
A polishing wheel is used for polishing metal and plastic workpieces.
A mandrel is used for mounting a polishing wheel.
■
Place the mandrel (14) in the collet nut (6).
■ Place a polishing wheel (19) on the screw.
Cutting and sanding (fig. A & B)
A cutting disc is used for cutting metal, plastic, wooden and stone
workpieces. A sanding disc is used for sanding wooden and plastic
workpieces. A mandrel is used for mounting a cutting disc or sanding disc.
■ Place the mandrel (15) in the collet nut (6).
■
Loosen the screw on the mandrel.
■ Place a cutting disc (21) or sanding disc (20) on the screw.
■
Place the screw on the mandrel and tighten it.
25C5030_20.p7 04-06-2004, 15:29 48