KINZO 25C5030, Instruction Manual

Page: 47 / 132

25C5030
47
ENGLISH
Mounting an accessory (fig. A & B)
■ Keep the spindle lock button (4) depressed.
■
Use the spanner (7) to slacken the collet nut (6).
■ Insert the shaft of the accessory into the collet.
■
Use the spanner to tighten the collet nut.
■ Release the spindle lock button.
■ In order to remove the accessory, proceed in reverse order.
Before mounting an accessory, always unplug the tool.
Using the flexible spindle (fig. C1 - C4 & D)
To mount the flexible spindle, proceed as follows:
■ Keep the spindle lock button (4) depressed.
■
Loosen the collet nut (6).
■ Successively remove the collet nut (6) and the collar (5).
■ Remove the collet nut from the flexible spindle and fit it onto the tool.
■
Insert the end of the flexible spindle into the collet nut.
■ Tighten the collet nut.
■
Release the spindle lock button.
■ Fit the collar of the flexible spindle onto the tool. Tighten the collar.
■ Fit the collet nut (6) onto the flexible spindle.
To mount an accessory, proceed as follows:
■
Position the key (8) in the recess to fix the collet.
■ Loosen the collet nut (6).
■ Insert the shaft of the accessory into the collet.
■
Tighten the collet nut.
■ Remove the key.
■
In order to remove the accessory, proceed in reverse order.
Before mounting an accessory, always unplug the tool.
Replacing the collet (fig. A & B)
■ Keep the spindle lock button (4) depressed.
■ Use the spanner (7) to slacken the collet nut (6).
25C5030_20.p7 04-06-2004, 15:29 47