7. RUNNING THE CAMERA
Launching and stop the camera
First connect the battery to the camera on socket.
Launching and the stop of the camera achieve by the starting button (61), located on the
handgrip. You can push this starting button and keep you thumb, and when you remove
it, it stops the camera. You can also fix this button by slightly pull it. Then the camera
runs. Push this button and the camera will stop.
Control of the dioptric correction for your eye
Unlock the first barrel of the viewer.
Watch in the viewfinder
Turn the second barrel of the finder until the ground glass markings look sharp.
Then close the first barrel at this value.
8. MAINTENANCE
Cleaning
For safety, the open metallic parts (gate, mount, magazine pressure, ..) must not stay
without protection. The magazines have plastic protection. The gate must always be
covered by a magazine engaged into the camera.
All metallic parts must NEVER be touched by any metallic tool !
All parts (gate, magazine & optics) must be cleaned with dry air.
