4. HOW ARE WORKING THE DIFFERENT PARTS OF THE CAMERA
Housing of the camera with the mechanism
In the housing of the camera (Fig. b) they are placed: mechanism, obturator with the
shutter, vertical shaft, the drive shaft of the magazine.
On the housing are installed the mechanism of the turning of obturator, the association,
the objective of magnifier, prism E to mounting, the button (29) fixations of the shutter of
obturator. On the rear wall of housing is a landing nest under the magazine and two
adjusting pintles (30) for fixation and fastening of the magazine.
Body with lens mount
The plate (32) serves as the protective housing of the mechanism of the camera and bears
on itself objective holder and magnifier. From the right side of head is nest "and" and a
knob (33) locks of fastening electric motor. In the upper part are a nest "b" for fastening
of device, a nest "in" for the installation of illuminating lamp and two ears (34) for
fastening of shoulder strap or movable knob.
