Magnifier (37) gives the straight increased (9,5 X) image of the removed object. It gives
the possibility of the control of the image obtained on the motion picture film both during
the preparation for the survey and during the survey on the frosted glass with the use of
the reflecting surface of the mirror reflex shutter. Magnifier in the advanced position can
be turned on 360°. The fixation of magnifier in the assigned position is achieved by lock
(38).
Dioptric correction is +- 5.
Magazines
Magazines have overall cavity for that feeding.
Capacity of the magazines is 30 (100 ft) and 120 m (400 ft). Under the protective housing
of the scythes are placed shaft to (1Y) of the drive (17) friction drive to assuming, the
lever (40) bolts of magazine. For regulating the tension is located idler (41).
On the magazines there is a meter counter (47) which indicates the quantity of remained
motion picture film. The installation of the magazine on the camera occurs automatic
connection with the magazine drive shaft. Then, the clutch (49) is connected with the
main drive shaft. Because of opacity of the magazine, the charging of the camera with
motion picture film is produced on the light by way install dawn of the magazine into the
camera.
Lenses are moving in the transitional mountings
Each lens has speckled similar mounting supplied with snow-fence blend. Focusing is
produced with the aid of outer ring (50). The distance scales are substituted on the
transitional mountings. Aperture or closing of the lenses is produced with the aid of the
ring of diaphragm (51). A complete set of neutral light filters can be screwed on the
lenses.
Motor
The camera is completed by the 29EPSS DC motor with stabilized speed at 25 fps
frequency (Fig. 11). 29EPSS motor ensures the normal work of the camera at the
frequency of 25 frame(s)/s at a temperature of ambient air from minus 25 to + 45 °C. The
motor works with a 12V battery, with a minimum of 2,8 Ah.
29EPSS motor ensures the delivery of synchronizing signal pilot - tone with the
frequency of survey 25 frame/s. A fuse with a 5A resistance is installed in the motor
5. INDICATION OF SAFEGUARDS
Movie camera 16 CX-2M is calculated to be used by professional cameramen. With the
preparation of the camera for the work, with the preventive inspection, and also during its
repair it is necessary that it would be
opened from the power source
.
