In case of heavy dust (or microscopic glued parts) glued, the gate and magazine pressure
can be cleaned with a soft plastic or a soft chamois or a fine cotton clothe.
The optical parts must not be touched with fingers and only cleaned with proper and soft
material & liquid.
Frequency of cleaning
The gate and the magazines must be inspected and shortly cleaned after each roll shot.
Every 10000 m of film shot, the camera must be completely serviced :
-Cleaning of the pin and registrated pin and the gate
-Removing the grease from the complete mechanism.
-Re-lube the mechanism
-Cleaning of all the optical parts
Special uses
In case of very low temperature (under -25 °C) the grease of the camera must be removed
and replace by a special grease for this purpose.
In case of high humidity environment (more than 75 %) the camera must also be
completely serviced as described above.
