17
2. Mounting
Step 1
Attach Cabinet Handle
Attach cabinet screw handle in the hole in the rear panel.
Step 2
Attach Castor Wheels
With at least two people carefully title the appliance on to its side
to attach the castor wheels.
Using a spanner attach to the castor wheels to base of appliance
with supplied nuts and washers.
Step 3
Adding Fuel Bed
Note:
for this step you will need a small step ladder or platform
to give extra height as the fuel beds need to be installed from
the top of the appliance.
Glass or Lava Rock for Burner
Note:
This should be done outside.
Cover the burner with the included lava rocks. DO NOT tip the bag
of lava rock onto the burner as the bags usually contain some
fine dust which could clog the burner jets. It is better to empty
the bags into a suitable container and then place the rock by
hand around the burner.
Make sure the area around the pilot housing is kept clear to
allow air to reach.
Caution:
blocking pilot area may delay lighting and lead to
abnormal burning.
E
N
GB-BAHAG KS FEUERSTELLE MANUAL RZ.qxp 20.04.22 12:14 Seite 17
