3. Create a password to protect your data on the DTL+. Enter it in the ‘
Password
’ field, then
re-enter it in the ‘
Password Confirmation
’ field, as seen below in
Figure 7.3
. The password
you create must meet the following criteria before the initialization process will allow you to
continue:
1. Passwords must contain 6 characters or more (up to 16 characters.)
2. Passwords must contain three (3) of the following criteria options:
- UPPER CASE, lower case, numeric, and/or special characters (!, $, etc.)
You may also enter a password hint, but it is not a mandatory field. The hint field can be
useful in providing a clue as to what the password is, should the password ever be
forgotten. (
Note: The hint CANNOT be an exact match to the password.
)
Figure 7.3 – Password Setup
Document No. 48008071-001.A02
DataTraveler
®
Page 14 of 22
