19
User Instruction Manual
Kingspan SafePro 2
Anchor and Cable System
14.0 Inspection, Maintenance,
Servicing & Warranty
14.1 Inspection and General Maintenance
The Kingspan SafePro 2 Cable System has been designed
to be used under a variety of conditions. It uses high-grade
components that are corrosion resistant. However, the
System’s working life depends on factors such as correct care
and maintenance and the environment in which the system is
installed. Before each occasion of use a visual check must be
conducted to ensure the Anchor is fit for purpose.
If the System is deformed in a way which is uncharacteristic
of the System you should not use it. Report the faults to the
Kingspan Certified Installer and schedule a maintenance visit.
DO NOT attempt to repair the System yourself, as this may
invalidate performance warranties and put personnel in danger.
The SafePro 2 Cable System is virtually maintenance free
dependent on environment. Occasionally the System may
need cleaning. This should be done with a soft brush, warm
water and a mild detergent. Ensure the parts are thoroughly
rinsed with plenty of clean water. Although highly resistant to
chemicals and environmental conditions, take all precautions to
avoid contaminating the system with acids, bitumen, cement,
chloride, paint or aggressive cleaning fluids.
Stainless Steel parts are particularly susceptible to pitting
corrosion from chlorine, so avoid exposure in this type of
environment. If the system is likely to be contaminated, please
contact your Kingspan Certified Installer or Kingspan for advice.
14.2 Servicing
In accordance with current national standards and Kingspan’s
recommendations, an Anchor that is in regular use should be
inspected at least once a year by an Certified Kingspan Installer.
In very high use applications or aggressive environments the
servicing interval should be more frequent as determined by the
installer. The System has many unique features, therefore only
Certified Kingspan Installers who have been trained and certified
should inspect this product.
A maintenance checklist is provided to our Approved Installers
to use during annual inspections. Please see Section 20.0 in this
manual.
If the System has sustained a fall arrest impact, has been
damaged, or is defective in any way, it must be immediately
categorised as unfit for use. The use of the system must be
discontinued, and servicing should be arranged as soon as
possible. All servicing requirements should be directed to
Kingspan or their Certified Installer.
14.3 Warranty
Full details of the warranty terms and exclusions are available
under the SafePro 2 Cable System warranty, which is available as
a separate document.
