ZCV39 / ZCV42
Surround Installations
Each Kit contains surround and [8] DT screws.
NOTE: ZCV39CSS or ZCV42CSS Safety Screen is required to use these surrounds.
All surrounds are mounted onto Screen as described below. Screen and surround are then mounted on unit as described in
Child Safety Screen Installation
section.
Surrounds require a 5/16” space on top to allow for installation & removal.
If protruding facing materials (i.e., concrete board, brick or tile) are to be used, refer to
Facing Material Dimension
Requirements
section.
A Tile Lip Kit is available: ZCV-TLK. Follow instructions included with kit to use.
ZCV39S1 / ZCV39S1PF/ ZCV39S2PF / ZCV42S1 / ZCV42S1PF / ZCV42S2PF
Install Screen with Surround attached as described in in
Child Safety Screen Installation
section.
To Attach Surround to Screen:
1.
Place surround face down on protected
surface.
2.
Lay Screen onto back side of surround.
3.
Fold up tabs on top & bottom of surround.
4.
Drive screws into screen through holes in
top & sides as shown.
32
