ZCVRB36S
Surround Installation
Surround Size:
(36
”W x 22-7/8”)
ZCVRB36SBL
ZCVRB36SSS
NOTE:
See
Framing Flush With Face of Fireplace
on
Nailing Tab
Guide
Page.
The Surround Frames are 1” thick, with a 3/4” space behind the frame.
The Fireplace may be covered up to within 1/8
” of the opening with non-
combustible materials.
1.
With Glass Door removed, hook
Surround over Lower Ledge of fireplace
and slide Side Fillers into place.
2.
Attach Side Filler of Surround to firebox face with two screws. Repeat for
other side of fireplace.
3.
Install two screws into inside top of
surround.
Replace Door.
Place Access Panel onto Access Panel Tabs.
Each kit contains:
(Qty-1) Surround Frame
(Qty-2) Surround Side Fillers
(Qty-1) Surround Access Cover
(Qty-6) #6 Self Tapping Screws
Side Fillers
(Left and Right)
Access Panel
Surround Frame
Install
Screw
⚠
NOTE
:
All hand and finger marks
must
be cleaned off with a soft cloth
and light detergent prior to
applying heat to the unit.
Stainless panels may discolour a
little during normal operation. This
is normal and should not be
considered a defect.
NOTE:
Cotton gloves
must
be worn to protect
the finish during installation and handling.
Access Panel Tab
Upper Slot
Lower Slot
Upper Slot
Lower Slot
Upper Slot
Lower Slot
Install
Screw
54
