ZCV3622 / ZCVRB3622
UHS Box
Included with base model IPI units.
The UHS Box is designed for in-unit installation of the Remote Receiver, Fan Control Module (not available), and the IPI
Module. Batteries for Remote Receiver can be changed by lifting 51-UHS up through opening.
If Lower Panel has been covered, batteries may be changed through the Access Area, but burner pan must be removed
to service or replace components (See
Burner Pan Removal
section of this manual).
COMPONENT LOCATIONS
(See Each Section For Connections & Wiring)
Battery Pack or
Remote Receiver
IPI Module
Remote Receiver
Access Area
UHS Box
Batteries
NOTE:
The gas line
connection may be made of
1/2” rigid pipe or an
Approved Kingsman Flex
Connector, such as
FP15GC
. Since some
municipalities have
additional local codes, it is
always best to consult your
local authorities and the
current CAN/CGA - B149.1
or .2 installation code in
Canada or the National
Fuel Gas code ANSI
Z223.1 in the U.S.A
IPI SYSTEM 2
Fan
UHS Box
ULK Transformer
Valve
Power
Vent
Control
Module
FCM is not available
IPI SYSTEM 1
IPI Module
FCM (not available)
Junction
Box
GAS
39
