ZCVRB47
V46EG Grill Installation
Option
⚠
Grill openings must be within 2” of enclosure top. This is to prevent excess heat from becoming trapped in
the top of the chase. See installation section of manual.
Parts List:
[1] Louver Grill (ready to paint)
[1] Outer Trim Grill Mount (ready to paint)
[6] #6 Black Screws
This Grill Meets Minimum Opening Air Free Requirements.
Required Opening Dimensions:
46-3/4” wide x 2-5/8” tall x 2” deep.
Outer Trim Dimensions:
47-13/16” wide x 3-13/16” tall
Installation:
1. Insert Outer Trim Grill Mount into opening and fasten to framing with a wood screw at each end.
2. Then insert Grill and attach with supplied #6 black screws. Do not over tighten screws.
Outer Trim
Grill Mount
Grill
Grill
Enclosure Top
Outer Trim
Grill Mount
25
