ZCVRB47
Surround Installation
Surrounds:
ZCVRB47S1BL (Black)
,
ZCVRB47S1SS (Stainless Steel) Dimensions: (44-1/2”W x 18-7/8”)
Surround Frames are 3/4” thick, by 1-1/2” wide.
Gap between surround and face of fireplace is variable- 5/8”, 7/8”, or 1-1/8”- determined by which mount hole is used.
The Fireplace may be covered with non-combustibles up to within 1/8” on sides of opening, and within 1/2” of opening
at top & bottom.
1. Remove the 2 Screws inside each side of the fireplace opening. Do not discard.
2. Hook the bottom of the Surround onto the bottom of the fireplace opening.
3. Reinsert the screws at the desired depth setting. Note: Do not completely tighten screws as the Safety Screen also
mounts onto them.
⚠
NOTE
:
Cotton gloves
must
be worn to protect the finish during installation and handling.
All hand and finger marks
must
be cleaned off with a soft cloth and light detergent prior to applying heat to
the unit.
Stainless panels may discolour a little during normal operation. This is normal and should not be considered a
defect.
NOTE:
In order to install the Surround,
No Finishing Materials are allowed
within a 1/2” area at the
Top & Bottom, and a 1/8” area on the Sides of the Fireplace Opening.
Each kit contains:
(Qty-1) Surround Frame
Remove
Screws
Hook bottom of
surround onto
bottom of
fireplace
opening
Insert Screws at
desired depth setting
1-1/8”
7/8”
5/8”
32
