REPLACING OF CERAMIC GLASS
Follow Removal of Front Door then clean all materials from door frame. Using a high temperature sealant
(temperature-resistant to 500°F (260°C)) apply a bead of approximately 1/8" to all four sides of frame and insert glass
with new gasket. Frame should be placed on a flat surface with a small amount of weight pressing glass into sealant.
Let dry approximately 15 to 20 minutes. The door can be reinstalled by reversing Steps 1,2.
11
CAUTIONS AND WARNINGS
DO NOT CLEAN WHEN THE GLASS IS HOT.
THE USE OF SUBSTITUTE GLASS WILL VOID ALL PRODUCT WARRANTIES.
CARE MUST BE TAKEN TO AVOID BREAKAGE OF THE GLASS.
DO NOT OPERATE THIS STOVE WITHOUT THE GLASS DOORS OR WITH A BROKEN GLASS DOOR.
DO NOT STRIKE OR ABUSE GLASS.
GLASS REPLACEMENT
Only Robax ceramic or coated Neoceram glass may be used for replacement. It must be a minimum of 5mm thick.
WARNING:
Do not operate appliance with the glass front removed, cracked or broken. Replacement of the glass
should be done by a licensed or qualified service person.
REMOVAL OF FRONT DOOR
1. To remove front casting, remove
top of stove. The top is not
attached; lift the two top grill
plates off first, then the top
itself.
2. The front casting can then be
lifted off by lifting upward 1/2”
and outward.
3. The glass door is now
accessible to remove by
releasing the latches on top of
the firebox.
4. Reassemble by replacing the
front glass door, then the front
decorative casting and then the
top itself and grill.
