Revision: 4 Date: 18 Jun 2020 Page 10 of 28
6.3 PM (Power Meter) Mode
Power Meter can be operated either in PM Auto Mode or PM Manual
Mode. PM Manual mode displays real time power measurement values.
PM Auto Mode:
In this operation mode, the instrument automatically scans the optical
input and displays the wavelength (along with its corresponding measured
power value) which has been detected with the highest level of power.
The instrument is defaulted to PM Auto Mode upon power-ON; otherwise it
can be switched from other operation modes to this by pressing [PM], see
picture below for instruments user interface.
KI 6501
Powering
down