KI 7010B-UM-11
6
GENERAL SAFETY SUMMARY
The following safety signs and symbols specify general safety
precautions which must be observed during all phases of operation,
service and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates
safety standards of design, manufacture and intended use of the
instrument. Kingfisher International assumes no liability for the
customer’s failure to comply with these requirements.
Before operation, review the instrument and user manual for safety
instructions. You must follow these to ensure safe operation and to
maintain the instrument in safe condition.
WARNING!
The
WARNING!
sign denotes a hazard. It calls attention to a
procedure, practice or the like, which, if not correctly performed or
adhered to, could result in injury. Do not proceed beyond a
WARNING!
sign until the indicated safety conditions are fully
understood and met.
CAUTION!
The
CAUTION!
sign denotes a hazard. It calls attention to an
operating procedure, or the like, which, if not correctly performed or
adhered to, could result in damage to or destruction of part, or all, of
the product. Do not proceed beyond a
CAUTION!
sign until the
indicated conditions are fully understood and met.
Safety Symbols
The apparatus will be marked with this symbol when it is necessary for
the user to refer to the instruction manual in order to protect the
apparatus against damage.
Initial Inspection
Inspect the shipping container for damage. If there is damage to the
container or cushioning, keep them until you have checked the
contents of the shipment for completeness and verified the instrument
both mechanically and electrically. If the contents are incomplete,
mechanical damage or defect is apparent, or if an instrument does not
pass the operator’s checks, notify t
he nearest Sales/Service Office.
Do not perform electrical tests when there are signs of shipping
damage to any portion of the outer enclosure (covers, panels, and so
on).
To check instrument performance, please refer to
Performance
Verification Tests
section of this manual.
WARNING!
You must return instruments with malfunctions to a
Service Centre for repair and calibration.
!
Summary of Contents for KI 7010B Series
