destination.
◆
This heater is NOT for use indoors
◆
This heater must only be used for space heating.
◆
Do not use your heater while sleeping
◆
Do not use your heater in high-rise flats
◆
Do not use your heater in basements, bathroom or bedroom
◆
If a leak is suspected, turn the gas off at cylinder.
◆
DO NOT disconnect the regulator. Extinguish all naked lights. Check all
connections. Slowly turn the gas on and brush the connections with soapy water or liquid
detergents a gas leak will form bubbles. If a leak is found, turn the gas off and inform your
gas supplier. DO NOT use the Heater again until it has been checked by your dealer.
Installation instruction
1. make sure all components are standing safely. Make sure the heater, gas hose and
gas bottle are safe.
2. To fix the holder on the bottle, use a clamping screw
3. Screw the pressure controller and the gas hose on the gas bottle valve.
4. Use the butterfly nut and the Chrysanthemum gasket to put the heater to the required
position and fix it on the stand
5. Screw the other end of gas hose to the safety valve.
6. Make sure all the screwing is right.
Before Putting the appliance into operation, check the necessarily the screw caps
for any gas leak using a leak detection spray or lye soap. Retighten them if
necessary.
Lighting instructions. (Stand mounted appliance)
4
Summary of Contents for KF-009D-03
Page 13: ...12 ...
