bedroom.
5. Always check leakage before and after you change the cylinder.
6. It is important that all gas connections have been correctly made to prevent any
leakage. Never use a match for gas leakage check. Use soapy water.
7. Use your cylinder always in upright position. Using the cylinders in a horizontal, laid
down position may damage your heater and create serious problems.
8. If a newly filled cylinder is used, ignition might be impaired as there may be some inert
gas present in the cylinder. In this case, change the cylinder with another one which is
partially used.
9. When you light your heater for the first time or if a long time has passed since your last
usage, light your heater first in open air (garden or balcony). Take your heater inside
after 15 min. have passed.
10.
Do not
use your heater while sleeping.
Do not
use your heater in high-rise flats.
Do not
use your heater in basements, bathrooms or bedrooms.
Do not
expose the appliance to rain,
Do not
use the appliance in a moist or wet environment.
Provide
adequate lighting.
Do not
use the appliance near flammable liquids or gases.
DO NOT USE THIS HEATER IN A PERMANENT DWELLING
11. This appliance requires a hose and a regulator, check with your gas supplier.
Please seek advice from your gas and regulator supplier so as use correct hose.
12. The guard on the appliance is to prevent risk of fire or injury form burns and no part of
it should be permanently removed.
IT DOES NOT GIVE FULL PROTECTION FOR YOUNG CHILREN OR THE
INFIRM
After Service Information:
Manufacturer:
Kingfer Industrial Co., Ltd
Address:
No.3, Shagang Road(west), Gangkou Town, Zhongshan City, Guangdong
Province, P.R.CHINA.
Tel:
+86-760-88401601
Fax:
+86-760-88436218
Email:
Website:
www.kingfergroup.com
9
2806-19
Summary of Contents for KF-009D-03
Page 13: ...12 ...
