Page 18
1 . Press
POWER
to turn on controller .
2 . Press
POWER
again to enter menu .
3 . Use the up and down arrows to navigate to the desired menu item .
4 . Press
POWER
to select menu item .
To access other menu items:
ACCESS MENU ITEMS
MENU ITEMS
15 . TEST TRANSPONDER
16 . TEST TUNER
6 . TEST GPS
11 . SET POSITION: (technical support menu) .
12 . SET TRIGGER: (technical support menu) .
2 . MOVE AZIMUTH: press and hold up or down arrow to move dish in azimuth
(up arrow = clockwise, down arrow = counterclockwise) .
3 . MOVE ELEVATION: press and hold up or down arrow to move dish in elevation
(up arrow = up, down arrow = down) .
4 . MOVE SKEW: press and hold up or down arrow to move dish in skew
(up arrow = right side down, down arrow = left side down) .
7 . TEST DISH: moves dish in all axes for one complete cycle .
13 . TEMPERATURE: displays current temperature of operating environment .
8 . TEST AZIMUTH: tests the azimuth sensor .
9 . TEST ELEVATION: tests the elevation sensor .
10 . TEST SKEW: tests the skew sensor .
5 . ENTER GPS COORDS: allows entering of GPS coordinates .
14 . TEST SATTBL: tests satellite table (technical support menu) .
1 . EXIT: select to go back to main menu .
• Obtain GPS coordinates (latitude and longitude) . For example, if in Reno Nevada, do a google search for
“lat/long of Reno Nevada.”
You would get 39 .5299° N, 119 .8143° W, but you only need to use the whole
numbers 39 and 119 .
• Select menu #5 and enter your coordinates .
• Exit the menu and press SEARCH to find the satellite.
• Contact KING customer service to have the GPS error resolved (952-345-8147) .
If your GPS will not find coordinates, this is a temporary fix until the GPS issue is resolved.
Summary of Contents for PHOENIX KPD1000
Page 22: ...Page 22 ...
Page 23: ...Page 23 ...
