Page 15
CONTROL CABLE CONNECTION
12 VDC
To LNB
To REC
110 VAC
KC1390
110 VAC
Receiver 1
Receiver 2
Receiver 3
Receiver 4
CONTROL CABLE CONNECTION
12 VDC
To LNB
To REC
110 VAC
KC1390
110 VAC
Receiver 1
Receiver 2
Receiver 3
Receiver 4
DIRECTV SWM
The SWM LNB has 8 channels available .
Each DVR takes 2 channels (one coax) .
A non-DVR uses one channel (one coax) .
You may use any combination of receivers
until you use up all 8 channels .
Example: An HR34 uses 5 channels leaving
3 channels available .
21 volt power inserter used .
Do not use a 29 volt power inserter
with the KING Phoenix .
This installation does not represent the Genie 3 that has a built-in power inserter .
2, 4 and 8 port splitters are available .
A 4 port splitter is shown .
Double check
all
electrical and
coax connections BEFORE
connecting satellite receiver and
applying power.
The control cable has 12
wires that control motors and
provide information and sensor
feedback. If the control cable is
mis-wired it can cause damage
to the GPS and sensors, which
may result in component failure.
Most problems are the result
of incorrect connections or
configurations.
!
Summary of Contents for PHOENIX KPD1000
Page 22: ...Page 22 ...
Page 23: ...Page 23 ...
