GETTING TO KNOW YOUR
INDUSTRIAL SHAPER
Getting to know your Industrial Shaper
1. Raising/lowering handwheel
2. Handwheel lock knob
3. Table inserts
4. Spindle (3/4” or 1-1/4”)
5. Left fence
6. Miter gauge
7. Safety guard lock knob (1 of 2)
8. Safety guard
9. Control panel
SPECIFICATIONS
MODEL KC-366SH
Spindle diameter 3/4”, 1-1/4”
Spindle speeds 5,000, 7,000 & 10,000 RPM
Table size 39-5/16” x 31-7/16”
Spindle openings on table 2-1/2”, 4-1/8”, 5-11/16”, 7-1/4”
Spindle length (3/4”) 3-7/8”, (1-1/4”) 5-7/8
Under nut capacity (3/4”) 4”, (1-1/4”) 6”
Table height 36-1/2”
Motor 5 HP, 18 Amp.
Voltage 220V, 1 phase, 60 Hz
Assembled dimensions (LxWxH)/weight 39-5/16” x 34” x 54-1/2” / 640 lbs
Package dimensions (LxWxH)/weight 42” x 41” x 43” / 720 lbs
10. Forward/reverse switch
11. On button
12. Emergency stop button
13. Spindle height digital readout
14. Featherboard
15. Right fence
16. Table
17. Starter pin
18. Door latch
19. Mobile base lock knob (1 of 2)
20. Infeed ram fin adjustment knob
21. Fence adjustment knob
22. Infeed fence lock handle
23. Upper guard lock knob (1 of 2)
24. Upper guard
25. Feather board lock handle
26. Fence side-to-side adjusting lock knob (1 of 2)
27. Outfeed fence lock handle
28. Fence assembly lock knob (1 of 2)
29. Outfeed ram fin adjustment knob
30. Fence 4” dust chute
