15
EN
3.3 -
Use limitations
Before installing the product, check that the size and the weight of
the gate leaf are within the limits stated in
chart 1.
kg - Maximum gate leaf weight
mm - maximum gate leaf length
WARNING!
- The single leaf must not exceed 4.2m in length.
Chart 1 - Use limitations
100
200
300
400
500
500 1000
2000
3500
3000
4000
2500
4500
1500
(mm)
(kg)
3.4 -
Installation preparation works
Fig.2
shows an example of an automation system using King-
Gates components. These components are positioned following a
typical and standard setup.
With reference to
Fig.2
, establish the approximate position where
each component will be installed and then arrange any conduits
for the electrical wiring.
Useful components for a complete system:
1 - MODUS MASTER gear motor
2 - Pair of photocells
3 - Pair of stops (open position)
4 - Photocell columns
5 - Flashing warning device with built-in antenna
6 - Key selector or digital keypad
7 - Vertical solenoid latch
8 - MODUS SLAVE gear motor
3
6
4
4
3
5
7
8
2
2
1
Fig. 2
