22
EN
8.
Technical characteristics of the product
WARNINGS:
• All the technical characteristics shown refer to an ambient temperature of 20°C (± 5°C).
• King-Gates reserves the right to make changes to the product at any time it deems necessary, while still retaining the same functionality
and intended use.
Modus 280
Modus XL
Type
Electromechanical gear motor for hinged gates or doors
Power supply
230Vac 50Hz
230Vac 50Hz
Motor power supply
24 Vdc
24 Vdc
Maximum absorbed power
280 W
350 W
Current absorbed
1.25 A
1.87 A
Maximum speed
1.5 rpm
1.5 rpm
Operating temperature
-20 /+55°C
-20 /+55°C
Work cycle
80%
80%
Dimensions
165x250x306 mm
165x250x306 mm
Leaf maximum dimensions/weight
2.8m / 300kg
4.2m / 500kg
9.
Product durability
Durability is the average economic life of the product. The durability
value is strongly influenced by the severity index of the manoeuvres
performed by the automatism: that is the sum of all the factors
contributing to the wear of the product (
see Table 1
).
To establish the probable durability of your automation, proceed as
follows:
01.
Calculate the severity index by summing up the percentage
values of the items in
Table 1
;
02.
In
chart 3
from the value just found, draw a vertical line to
cross the curve; from this point draw a horizontal line to cross the
"manoeuvring cycles” line. The determined value is the estimated
durability of your product.
The durability estimate is based on the design calculations and the
results of tests carried out on prototypes. In fact, being an estimate,
it does not represent any guarantee on the actual duration of the
product.
TABLE 1
Severity index
Leaf weight [Kg]
> 200 kg
0%
> 300 kg
5%
> 400 kg
10%
500 kg
20%
Leaf length [m]
2 - 3 m
0%
3 - 4 m
10%
4 - 4.2 m
20%
Ambient temperature above 40°C or below 0°C or humidity over 80%
20%
Solid door
15%
Installation in a windy area
15%
