King Controls 1200-KU, Installation And Operating Instructions Manual

Page: 10 / 36

2. Choose your desired wiring configuration:
Dish Network / ExpressVu / DIRECTV
(single satellite or auto switching from master receiver only)
Fig. 10, Page 9
DIRECTV
(auto switching from any receiver)
Fig. 11, Page 10
3. TEMPORARILY connect system as outlined. MAKE SURE TO CONNECT POWER
LAST.
4. Continue with SATELLITE CONFIGURATION on page 12.
Page 8
PRE-INSTALLATION HOOKUP FOR INITIAL SEARCH
Note: For the temporary hookup and initial testing, plug in the Diagnostic Keypad, not the wall mount controller.
To verify proper operation of the components, temporarily connect the unit and perform an initial
search as follows:
1. Place the dome unit in its mounting location
and temporarily secure the unit from falling.
Depending on the location, you may have to
use the supplied right angle F-connectors to
avoid bending the coax too sharply during the
temporary hookup described below
(Fig. 9) .
IMPORTANT! IF CONFIGURING THE RECEIVER FOR MULTIPLE SATELLITE
SWITCHING WITH DISH NETWORK OR EXPRESSVU, Y0U MUST DO THE
PRE-INSTALLATION CHECK ON A MOTIONLESS PLATFORM SUCH AS THE DOCK
OR GROUND.
Fig. 9